System I - Factory Swaged Lag Rigging Screw & Fork Terminal for Timber Posts

System I - Factory Swaged Lag Rigging Screw & Fork Terminal for Timber Posts

The Lag Rigging Screw with Fork Terminal Slimline Balustrade System is an elegant looking stainless steel balustrade with an external slimline tensioner fitted to one end of the wires, that screws directly into the timber post. 

Please note that this system is unsuitable for inclined stair runs.

Enter the total number of System I wires required and add to cart.  By using Quickshop, you can add the things you need without leaving this page.

Calculate the total length in whole metres of wire rope required (number of wires per run x total length of all runs).

Add any other accessories you need (eg lag screw driver tool and rigging screw spanner).

You'll need to send us a separate email with your required run lengths, for example:

3250 x 11, 4146 x 11, 2545 x 11 - which means:

11 wires @ 3250mm, 11 wires @ 4146mm, and 11 wires @ 2545mm.

Installation Instructions

Balustrade System I - Rigging Screw with Swage Terminal / Wood Screw and Lag Screw

Balustrade System I - Rigging Screw with Swage Terminal / Wood Screw and Lag Screw

$15.00

Our Lag Rigging Screw Balustrade System (System I) is a professional looking and stylish stainless wire balustrade. The stainless balustrade fitti...

View full details
$15.00
3.2mm S316 Stainless Rope 1 x 19 Construction - cut length per metre

3.2mm S316 Stainless Rope 1 x 19 Construction - cut length per metre

$1.20

AISI 316 (marine grade) stainless steel premium quality wire rope. Made with diamond coated dies and heat annealed, this stainless steel cable is e...

View full details
$1.20
Socket for driving M6 lag eye screw into timber (Nickel Plated). Not suitable for Impact Drivers

Socket for driving M6 lag eye screw into timber (Nickel Plated). Not suitable for Impact Drivers

$5.10

Socket for driving M6 lag eye screw into timber (Nickel Plated). Not suitable for Impact Drivers

$5.10
C-Spanner Tightening Tool for M5 Rigging Screw

C-Spanner Tightening Tool for M5 Rigging Screw

$5.10

Electro-polished stainless steel C-Spanner tightening tool for easy tightening of rigging screw bodies (bottle-screws).

$5.10
Nylon Grommet Split Type, Black, 9.0mm O.D. x 10mm long, suits wire rope 3.2-5.0mm

Nylon Grommet Split Type, Black, 9.0mm O.D. x 10mm long, suits wire rope 3.2-5.0mm

$0.20

Used for protecting aluminium or steel posts against chafing or electrolysis with stainless balustrade wire. Silver -grey grommets look good when u...

View full details
$0.20

You recently viewed

Clear recently viewed