S316 Swivel Connector, Pin Type, M6 LH Male and Female Threads
Patented AISI316 polished stainless swivel connectors create a slimline stainless wire balustrade for railings and stairs where the wire is inclined at an angle from 0° to 90° from the horizontal. Swivel connectors are easy to install in tube (secured with blind rivet nuts), timber posts (secured with countersunk timber inserts), metal plate (die-tapped thread) and masonry posts (secured with masonry anchors). The left-hand connector screws into a left-hand threaded fastener inserted perpendicularly to the anchor post and swivels to incline one end of the balustrade wire which has been swaged with a left-hand threaded stud. The right-hand connector screws into a right-hand threaded fastener inserted perpendicularly to the anchor post and swivels to incline the opposite end of the balustrade wire which has been swaged with a right-hand threaded stud. The stainless balustrade wire is tensioned by simultaneously rotating the left and right hand swaged threaded studs into the left and right hand swivel connectors. Can also be used for horizontal balustrade wires that change direction between 90° and 180° (eg 135° corners).